...

Steady-State Error Reduction of Reinforcement Learning based Indirect Current Control of Permanent Magnet Synchronous Machines

T. Schindler, L. Broghammer, D. Hufnagel, N. Diringer, B. Hofmann, A. Dietz, P. Karamanakos, R. Kennel

Published in: PCIM Europe 2024 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management

11-13 Juni 2024 Nuremberg, Germany

DOI: 10.30420/566262017

Hard-and soft-switching behavior of bipolar 1.2 kV gallium arsenide (GaAs) diodes in comparison to silicon and silicon carbide devices

M. Zocher, V. Starost, N. Grass, J. Kowalsky, V. Dudek

Published in: 2024 Energy Conversion Congress & Expo Europe (ECCE Europe)

02-06 September 2024 Darmstadt, Germany

DOI: 10.1109/ECCEEurope62508.2024.10751930

Efficiency Investigations of an Auxiliary Resonant Commutated Pole (ARCP) Inverter

M. Zocher, N. Grass and R. Kennel

Published in: PCIM Europe 2024 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management

11-13 Juni 2024 Nuremberg, Germany

DOI: 10.30420/566262166

Parameter Identification Methods for Multi-Phase Permanent Magnet Synchronous Machines

M. Hoerner, V. Hoppe, T. Wilfling, A. Dietz, P. Karamanakos, R. Kennel

Published in: 2023 IEEE International Electric Machines & Drives Conference (IEMDC)

15-18 May 2023 San Francisco, CA, USA

DOI: 10.1109/IEMDC55163.2023.10238936

Deep Reinforcement Learning Current Control of Permanent Magnet Synchronous Machines

T. Schindler, L. Broghammer, P. Karamanakos, A. Dietz, R. Kennel

Published in: 2023 IEEE International Electric Machines & Drives Conference (IEMDC)

15-18 May 2023 San Francisco, CA, USA

DOI: 10.1109/IEMDC55163.2023.10238988

Reinforcement Learning Control of Six-Phase Permanent Magnet Synchronous Machines

L. Broghammer, D. Hufnagel, T. Schindler, M. Hoerner, P. Karamanakos, A. Dietz, R. Kennel

Published in: 2023 13th International Electric Drives Production Conference (EDPC)

29-30 November 2023 Regensburg, Germany

DOI: 10.1109/EDPC60603.2023.10372153

An overview of design and calculation of a synchronous-reluctance machine

M. Schmidt, T. Wilfling, A. Dietz, N. Parspour

Published in: 2023 13th International Electric Drives Production Conference (EDPC)

29-30 November 2023 Regensburg, Germany

DOI: 10.1109/EDPC60603.2023.10372169

Temperature influence on core losses and magnetization demand of electrical steel sheets using adapted Epstein frame and ring probe

M. Regnet, T. Schäufele, A. Dietz, B. Löhlein

Published in: 2023 13th International Electric Drives Production Conference (EDPC)

29-30 November 2023 Regensburg, Germany

DOI: 10.1109/EDPC60603.2023.10372149

Segmented exterior-rotor PMSM for increased torque density

T. Wilfling, M. Schmidt, A. Dietz, A. Möckel

Published in: 2023 13th International Electric Drives Production Conference (EDPC)

29-30 November 2023 Regensburg, Germany

DOI: 10.1109/EDPC60603.2023.10372162

High Bandwidth Integrator for Differential,PCB Integrated Rogowski Coils

M. Zocher, V. Starost, N. Grass, M. Schmidt, T. Wilfling

Published in: 2023 International Conference on Electrical Drives and Power Electronics (EDPE)

25-27 September 2023 The High Tatras, Slovakia

DOI: 10.1109/EDPE58625.2023.10274019

DC link balancing of an Auxiliary Resonant Commutated Pole Inverter

M. Zocher, N. Grass and R. Kennel

Published in: 2023 25th European Conference on Power Electronics and Applications (EPE'23 ECCE Europe)

04-08 September 2023

DOI: 10.23919/EPE23ECCEEurope58414.2023.10264431

Adaptive Control Methods for an Auxiliary Resonant Commutated Pole Inverter

M. Zocher, N. Grass and R. Kennel

Published in: PCIM Europe 2023 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy

09-11 Mai 2023 Nuremberg, Germany

DOI: 10.30420/566091241

Design, Construction and Measurement of a Laminated Transverse Flux Machine

L. Rabenstein, M. Schmidt, A. Dietz and N. Parspour

Published in: 2022 International Conference on Electrical Machines (ICEM)

05-08 September 2022 Valencia, Spain

DOI: 10.1109/ICEM51905.2022.9910771

On-Chip Simulation of a Nine-Phase Electrical Drive and Power Electronics for Rapid Control Prototyping Applications

V. Hoppe, T. Schindler, M. Hoerner, A. Dietz, R. Kennel

Published in: IKMT 2022; 13. GMM/ETG-Symposium, 2022, pp. 1-6.

2022 Linz, Austria

IEEE Xplore: Link

Minimizing voltage stress in Auxiliary Resonant Commutated Pole Inverters Using saturable Inductors

M. Zocher, N. Grass and R. Kennel

Published in: 24th European Conference on Power Electronics and Applications( EPE'22 ECCE Europe), 2022, pp. 1-9.

2022 Hanover, Germany

IEEE Xplore: Link

Auxiliary Resonant Commutated Pole Inverter (ARCPI) Operation Using online voltage measurements

M. Zocher, N. Grass and R. Kennel

Published in: 2022 IEEE Applied Power Electronics Conference and Exposition (APEC)

20-24 March 2022 Houston, TX, USA

DOI: 10.1109/APEC43599.2022.9773560

Variable Switching Point Predictive Current Control for Multi-Phase Permanent Magnet Synchronous Drives

M. Hoerner, S. Wendel, A. Dietz, P. Karamanakos, R. Kennel

Published in: 2021 IEEE International Conference on Predictive Control of Electrical Drives and Power Electronics (PRECEDE)

20-22 November 2021 Jinan, China

DOI: 10.1109/PRECEDE51386.2021.9680920

Algebraic synthesis and analysis of windings for AC machines. e & i

J. Germishuizen, R. Steckel, A. Kremser

Published in: Eletrotechnik und Informationstechnik, Volume 138, pages 78–84

05 March 2021

DOI: 10.1007/s00502-021-00873-6

Algebraic Design of Symmetrical Windings for AC Machines

J. Germishuizen, A. Kremser

Published in: IEEE Transactions on Industry Applications ( Volume: 57, Issue: 3, May-June 2021)

05 February 2021

DOI: 10.1109/TIA.2021.3057607

Influence of Cutting Tool Wear on Core Losses and Magnetizing Demand of Electrical Steel Sheets

M. Regnet, A. Kremser, M. Reinlein, P. Szary, U. Abele

Published in: 2019 9th International Electric Drives Production Conference (EDPC)

03-04 December 2019 Esslingen, Germany

DOI: 10.1109/EDPC48408.2019.9011866

Experimental Comparison of DC/DC Converters for Wide Input Voltage Ratio Applications

M. Gerstner, M. Maerz, A. Dietz

Published in: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society

14-17 October 2019 Lisbon, Portugal

DOI: 10.1109/IECON.2019.8926712

Modulares Simulationswerkzeug zur Analyse dynamischer Vorgänge in Hochvolt Bordnetzen

S. Raab, M. Hoerner, A. Ackva, A. Dietz

Published in: Haus der Technik: Elektrische Antriebstechnologie für Hybrid- und Elektrofahrzeuge, 2019

2019 Wuerzburg, Germany

Print ISBN: 978-3-8169-8483-2

The importance of an overall system simulation for branched high-voltage vehicle electrical systems

S. Raab, M. Hoerner, A. Ackva, A. Dietz

Published in: E-MOTIVE Expertenforum 2019, 2019

2019 Schweinfurt, Germany

Semi-analytical and numerical calculation of a great number of induction machines taking into account cutting edges

M. Reinlein, M. Regnet, P. Szary, U. Abele, A. Kremser

Published in: IKMT 2019 - Innovative small Drives and Micro-Motor Systems; 12. ETG/GMM-Symposium, 2019

2019 Wuerzburg, Germany

IEEE Xplore: Link

Impact of different cutting methods on core losses and magnetizing demand of electrical steel sheets

M. Reinlein, M. Regnet, P. Szary, U. Abele, A. Kremser

Published in: IKMT 2019 - Innovative small Drives and Micro-Motor Systems; 12. ETG/GMM-Symposium, 2019

2019 Wuerzburg, Germany

IEEE Xplore: Link

Comparison of Reinforcement Learning Algorithms for Speed Ripple Reduction of Permanent Magnet Synchronous Motor

T. Schindler, L. Foss, A. Dietz

Published in: IKMT 2019 - Innovative small Drives and Micro-Motor Systems; 12. ETG/GMM-Symposium, 2019

2019 Wuerzburg, Germany

IEEE Xplore: Link

Experimental Evaluation of Cascaded Continuous and Finite Set Model Predictive Speed Control for Electrical Drives

S. Wendel, B. Haucke-Korber, A. Dietz, R. Kennel

Published in: 2019 21st European Conference on Power Electronics and Applications (EPE '19 ECCE Europe)

03-05 September 2019 Genova, Italy

DOI: 10.23919/EPE.2019.8914947

Design optimisation of IPM machines considering the constant power range

J. Bruckschlögl, J. Germishuizen, A. Kremser

Published in: 2019 19th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF)

29-31 August 2019 Nancy, France

DOI: 10.1109/ISEF45929.2019.9097003

Operating Point Dependent Variable Switching Point Predictive Current Control for PMSM Drives

S. Wendel, P. Karamanakos, A. Dietz, R. Kennel

Published in: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE)

31 May 2019 - 02 June 2019 Quanzhou, China

DOI: 10.1109/PRECEDE.2019.8753362

UltraZohm - a Powerful Real-Time Computation Platform for MPC and Multi-Level Inverters

S. Wendel, A. Geiger, E. Liegmann, D. Arancibia, E. Durán, T. Kreppel, F. Rojas, F. Popp-Nowak, M. Diaz, A. Dietz, R. Kennel, B. Wagner

Published in: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE)

31 May 2019 - 02 June 2019 Quanzhou, China

DOI: 10.1109/PRECEDE.2019.8753306

Efficiency Analysis of Three-Phase and Dual Three-Phase Induction Machine with Sinusoidal Supply

R. Steckel, S. Daum, A. Kremser, H.-G. Herzog

Published in: 2019 IEEE International Electric Machines & Drives Conference (IEMDC)

12-15 May 2019 San Diego, CA, USA

DOI: 10.1109/IEMDC.2019.8785154

Magnetic Gearing as a Functional Principle in Electric Drives

T. Gerlach, R. Vollmer, A. Kremser, D. Gerling

Published in: Applied Mechanics and Materials 882, 2018

2018

DOI: 10.4028/www.scientific.net/AMM.882.162

Algebraic Design of Symmetrical Windings 

A. Kremser

Published in: FEMAG-Anwendertreffen 2018

2018 Friedrichshafen, Germany

DOI: 10.1109/ICEM49940.2020.9271023

Berechnung von Wirbelstromverlusten in elektrischen Maschinen

J. Krotsch, M. Martens

Published in: FEMAG-Anwendertreffen 2018

2018 Friedrichshafen, Germany

Magnetverlustberechnung mit FEMAG – Review und Ausblick

J. Krotsch, M. Martens

Published in: FEMAG-Anwendertreffen 2018

2018 Friedrichshafen, Germany

Web-Link: Ansehen

Engineering Approach to Calculate the Additional Losses in Inverter Fed RSM and SPMSM

R. Steckel, J. Germishuizen, A. Kremser

Published in: 2018 XIII International Conference on Electrical Machines (ICEM)

03-06 September 2018 Alexandroupoli, Greece

DOI: 10.1109/ICELMACH.2018.8506770

Improved Current Control Structure for the Brushless Doubly-Fed Machine Based on a New Equivalent Circuit Model 

P. Löhdefink, A. Dietz, A. Möckel

Published in: 2018 XIII International Conference on Electrical Machines (ICEM)

03-06 September 2018 Alexandroupoli, Greece

DOI: 10.1109/ICELMACH.2018.8506998

Cascaded Continuous and Finite Model Predictive Speed Control for Electrical Drives

S. Wendel, B. Haucke-Korber, A. Dietz, R. Kennel

Published in: 20th European Conference on Power Electronics and Applications (EPE'18 ECCE Europe), 2018

2018 Riga, Latvia

IEEE Xplore: Link

Determination of eddy current losses in permanent magnets of SPMSM with concentrated windings: A hybrid loss calculation approach and experimental verification

T. Gerlach, L. Rabenstein, A. Dietz, A. Kremser, D. Gerling

Published in: 2018 Thirteenth International Conference on Ecological Vehicles and Renewable Energies (EVER)

10-12 April 2018 Monte Carlo, Monaco

DOI: 10.1109/EVER.2018.8362395

Dynamic Model Predictive Position Control for Linear Actuators in Automotive Applications

S. Wendel, P. Löhdefink, M. Hoerner, A. Dietz, R. Kennel

Published in: 2018 Thirteenth International Conference on Ecological Vehicles and Renewable Energies (EVER)

10-12 April 2018 Monte Carlo, Monaco

DOI: 10.1109/EVER.2018.8362362

Direct Drive concept for Heavy-Duty Traction Applications with the Brushless Doubly-Fed Induction Machine

P. Löhdefink, A. Dietz, A. Möckel

Published in: 2018 Thirteenth International Conference on Ecological Vehicles and Renewable Energies (EVER)

10-12 April 2018 Monte Carlo, Monaco

DOI: 10.1109/EVER.2018.8362360

Modellbasierte Ermittlung des vorteilhaften Einsatzbereiches geregelter Kaskadenmaschinen

P. Löhdefink

Published in: Kleinmaschinenkolloquium (Vortrag), 2018

2018 Ilmenau, Germany

The brushless doubly fed induction machine as generator for small hydro power – machine design and experimental verification

P. Löhdefink, A. Dietz, A. Möckel

Published in: 2017 Twelfth International Conference on Ecological Vehicles and Renewable Energies (EVER)

11-13 April 2017 Monte Carlo, Monaco

DOI: 10.1109/EVER.2017.7935892

Automated parameter identification of fractional horse power permanent magnet synchronous motors

M. Hoerner, S. Wendel, A. Dietz

Published in: Innovative Small Drives and Micro-Motor Systems; 11th GMM/ETG-Symposium, 2017

2017 Saarbrücken, Germany

IEEE Xplore: Link

Model Predictive Position Control for Permanent Magnet Synchronous Linear Motor

S. Wendel, A. Dietz, R. Kennel

Published in: Innovative Small Drives and Micro-Motor Systems; 11th GMM/ETG-Symposium, 2017

2017 Saarbrücken, Germany

FPGA Based Finite-Set Model Predictive Current Control for Small PMSM Drives With Efficient Resource Streaming

S. Wendel, A. Dietz, R. Kennel

Published in: 2017 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE)

04-06 September 2017 Pilsen, Czech Republic

DOI: 10.1109/PRECEDE.2017.8071270

Area-Efficient FPGA Implementation of Finite Control Set Model Predictive Current Control

S. Wendel, A. Dietz, R. Kennel

Published in: 2017 IEEE Southern Power Electronics Conference (SPEC)

04-07 December 2017 Puerto Varas, Chile

DOI: 10.1109/SPEC.2017.8333557

High voltage battery storage system for multiuse

A. Dietz, S. Hörlin, N. Grass

Published in: 2016 Eleventh International Conference on Ecological Vehicles and Renewable Energies (EVER)

06-08 April 2016 Monte Carlo, Monaco

DOI: 10.1109/EVER.2016.7476434

Influence of yoke and tooth saturation on the air gap field in Induction Machines: A new analytical approach

M. Reinlein, M. Swarte, T. Hubert, A. Kremser

Published in: 2016 XXII International Conference on Electrical Machines (ICEM)

04-07 September 2016 Lausanne, Switzerland

DOI: 10.1109/ICELMACH.2016.7732559

Modular and intelligent battery control system for electric vehicles and stationary storage systems

N. Grass, F. Ferner, F. Nickl

Published in: 2016 IEEE International Telecommunications Energy Conference (INTELEC)

23-27 October 2016 Austin, TX, USA

DOI: 10.1109/INTLEC.2016.7749093

Influence of Villari Effect on the magnetizing current of Induction Machines by shrink fitting of rotor cores

M. Reinlein, M. Regnet, T. Hubert, A. Kremser, U. Werner, J. Bönig

Published in: 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM)

22-24 June 2016 Capri, Italy

DOI: 10.1109/SPEEDAM.2016.7525813

Eddy current loss analysis in permanent magnets of synchronous machines 

T. Gerlach, R. Steckel, T. Hubert, A. Kremser

Published in: 2016 6th International Electric Drives Production Conference (EDPC)

30 November 2016 - 01 December 2016 Nuremberg, Germany 

DOI: 10.1109/EDPC.2016.7851341

Drehzahlvariable Kaskadenmaschine als Generatorsystem für Kleinwasserkraftwerke

P. Löhdefink, A. Dietz

Published in: 19. Internationales Anwenderforum Kleinwasserkraftwerke, 2016

2016 Innsbruck, Austria

Flexible design of reluctance synchronous machines using constrained genetic algorithm optimization

T. Hubert, M. Reinlein, A. Kremser, H.-G. Herzog

Published in: 2015 18th International Conference on Electrical Machines and Systems (ICEMS)

25-28 October 2015 Pattaya, Thailand

DOI: 10.1109/ICEMS.2015.7385159

Evaluation of model based predictive control algorithms for fractional horse power drives

M. Blank, A. Dietz

Published in: Green Factory Kolloquium, 2015

2015 Nuremberg, Germany

DOI: 10.4028/www.scientific.net/AMM.805.231

Magnetic flux distribution between rotor and shaft in two-pole induction machines with axial cooling vents

M. Reinlein, T. Hubert, A. Kremser, T. Bauer 

Published in: 2015 IEEE 5th International Conference on Power Engineering, Energy and Electrical Drives (POWERENG)

11-13 May 2015 Riga, Latvia

DOI: 10.1109/PowerEng.2015.7266365

Energetic Simulation of Complex Mechatronic Drive Systems over Complete Drive Cycles

S. Hörlin, A. Dietz

Published in: Green Factory Kolloquium, 2015

2015 Nuremberg, Germany

DOI: 10.4028/www.scientific.net/AMM.805.241 

Preliminary design of reluctance synchronous machines using simplified magnetic circuit analysis

T. Hubert, M. Reinlein, A. Kremser, H.-G. Herzog

Published in: 2015 IEEE 5th International Conference on Power Engineering, Energy and Electrical Drives (POWERENG)

11-13 May 2015 Riga, Latvia

DOI: 10.1109/PowerEng.2015.7266299

Torque ripple minimization of reluctance synchronous machines by continuous and discrete rotor skewing

T. Hubert, M. Reinlein, A. Kremser, H.-G. Herzog

Published in: 2015 5th International Electric Drives Production Conference (EDPC)

15-16 September 2015

DOI: 10.1109/EDPC.2015.7323229

Nonlinear reluctance network method for synchronous reluctance machine analysis

T. Hubert, R. Steckel, M. Reinlein, A. Kremser, H.-G. Herzog

Published in: 2015 18th International Conference on Electrical Machines and Systems (ICEMS)

25-28 October 2015 Pattaya, Thailand

DOI: 10.1109/ICEMS.2015.7385163

Modeling and power flow analysis of cascaded doubly-fed induction machines

P. Löhdefink, A. Dietz, A. Möckel

Published in: 2015 5th International Electric Drives Production Conference (EDPC)

15-16 September 2015 Nuremberg, Germany

DOI: 10.1109/EDPC.2015.7323221

Predictive Control for fractional horse power drives (FHP)

S. Wendel, A. Dietz

Published in: Internationale Kleinmaschinen-Tagung (IKMT), 2015

2015 Colonge, Germany

Evaluation of a new microcontroller based solution for sensorless control of electrical drives

M. Blank, P. Löhdefink, B. Reinhardt, A. Dietz

Published in: 2014 6th European Embedded Design in Education and Research Conference (EDERC)

11-12 September 2014 Milan, Italy

DOI: 10.1109/EDERC.2014.6924374

Betrachtung der Systemkomplexität bei elektrischen Antriebssträngen

A. Dietz

Published in: Workshop Leichtbau in der Antriebstechnik, Cluster Mechatronik und Automation, 2014

2014 Augsburg, Germany 

Auslegung einer kontaktlosen induktiven Übertragung der Erregerleistung in den Rotor einer fremderregten Synchronmaschine

A. Dietz, A. Littau, B. Wagner, S. Köhler, S. Weber

Published in: CoFAT Konferenz, 2014

2014 Munich, Germany

Smart Home Precipitator for Biomass Furnaces. Design Considerations on a Small-Scale Electrostatic Precipitator

T. Fischer, N. Grass, N. Zouzou, L. Dascalescu, R. Greil, N. Hopf

Published in: IEEE Transactions on Industry Applications ( Volume: 50, Issue: 3, May-June 2014)

2014

DOI: 10.1109/TIA.2013.2288430

High voltage power supply and control technologies for electrostatic precipitators in biomass applications

N. Grass, T. Fischer

Published in: 2014 IEEE Industry Application Society Annual Meeting

05-09 October 2014 Vancouver, BC, Canada

DOI: 10.1109/IAS.2014.6978357

Full scale power quality emulation system for testing of low voltage grid components

N. Grass, S. Rehmet

Published in: 2014 IEEE International Energy Conference (ENERGYCON)

13-16 May 2014 Cavtat, Croatia

DOI: 10.1109/ENERGYCON.2014.6850407

Modular and scalable interleaved operating AC/DC or DC/DC power converter array for HVDC systems

N. Grass, C. Raum, S. Rehmet

Published in: 2014 IEEE 36th International Telecommunications Energy Conference (INTELEC)

28 September 2014 - 02 October 2014 Vancouver, BC, Canada

DOI: 10.1109/INTLEC.2014.6972178

High voltage battery storage system for dual use

S. Hörlin, N. Grass, A. Dietz, S. Rehmet, C. Raum

Published in: 2014 IEEE 36th International Telecommunications Energy Conference (INTELEC)

28 September 2014 - 02 October 2014 Vancouver, BC, Canada

DOI: 10.1109/INTLEC.2014.6972233

Modulares Batteriespeichersystem zum dual use

S. Hörlin, A. Dietz, N. Grass, R. Gross, B. Schultes

Published in: NEIS Konferenz, 2014

2014 Hamburg, Germany

Stationäre Speicher als Schnellladestation für Elektrofahrzeuge

S. Hörlin, A. Dietz, N. Grass, R. Gross, B. Schultes, S. Rehmet, C. Raum

Published in: Elektromobilitätsausstellung EMA, 2014

2014 Nuremberg, Germany

Abschätzung und Bewertung der Leistungsfähigkeit von Synchron-Reluktanzmaschinen als Traktionsantrieb

T. Hubert, M. Reinlein, R. Steckel, A. Kremser

Published in: Elektromobilitätsaustellung EMA, 2014

2014 Nuremberg, Germany

Eisen- und Zusatzverluste von Asynchronmaschinen

A. Kremser

Published in: ANSYS Anwendertag, 2014

2014 Nuremberg, Germany

Aktuelle Motorenentwicklung

A. Kremser

Published in: IE3/ IE4, 2014

2014 Amberg, Germany

Energy-efficient electric drives and powertrains in variable speed drive applications

A. Kremser

Published in: Green Factory Kolloquium, 2014

2014 Nuremberg, Germany

A study of regenerative energy systems and Pump applications in distributed DC-microgrids

S. Oberlander-Hörath, P. Löhdefink, M. Grillenberger, J. Fürst, A. Dietz, S. Hörlin, A. Gröger

Published in: 2014 6th European Embedded Design in Education and Research Conference (EDERC)

11-12 September 2014 Milan, Italy

DOI: 10.1109/EDERC.2014.6924375

Evaluation einer neuen Controller basierten sensorlosen Motorsteuerung für Drehfeldmaschinen

Reinhardt, M. Blank, P. Löhdefink, A. Dietz

Published in: Elektromobilitätsausstellung EMA, 2014

2014 Nuremberg, Germany

Elektrische Maschinen und Antriebe

A. Kremser

Published in: Auflage 4, korr. und verb. Aufl.: Springer Vieweg, 2013

2013

Print ISBN: 978-3-658-15074-7

Innovative Klein- und Mikroantriebstechnik

A. Dietz

Published in: Fachtagung Innovative Klein- und Mikroantriebstechnik Beiträge der 9. GMM-ETG-Fachtagung, 2013

19- 20 September 2013 Nuremberg, Germany

Optimization of analytical iron loss approaches for electrical machines

M. Reinlein, T. Hubert, A. Hoffmann, A. Kremser 

Published in: 2013 3rd International Electric Drives Production Conference (EDPC)

29-30 October 2013 Nuremberg, Germany

DOI: 10.1109/EDPC.2013.6689759

Systematic error of analytical iron loss approaches in electrical machines

M. Reinlein, A. Hoffmann, T. Hubert, A. Kremser

Published in: Innovative Small Drives and Micro-Motor Systems - 9. GMM/ETG-Fachtagung, 2013

2013 Nuremberg, Germany

IEEE Xplore: Link

High average power high voltage modulator using a dual pulse transformer circuit

W. Hartmann, K.-D. Rohde, N. Grass, M. Schwendner

Published in: 2012 IEEE International Power Modulator and High Voltage Conference (IPMHVC)

03-07 June 2012 San Diego, CA, USA

DOI: 10.1109/IPMHVC.2012.6518672

Smart Home Precipitator for biomass-furnaces: Design considerations on a small scale electrostatic precipitator

T. Fischer, N. Gras, N. Zouzou, L. Dascalescu, R. Greil, N. Hopf

Published in: 2012 IEEE Industry Applications Society Annual Meeting

07-11 October 2012 Las Vegas, NV, USA

DOI: 10.1109/IAS.2012.6373987

Harmonic compensation in a load emulationsystem using different control techniques

M. Hausmann, N. Grass, B. Piepenbreier

Published in: INTELEC 2012 - 2012 IEEE International Telecommunications Energy Conference, 2012

30 September 2012 - 04 October 2012 Scottsdale, AZ, USA

DOI: 10.1109/INTLEC.2012.6374496

Sensorless vector control of a permanent magnet synchronous generator for micro hydro power

P. Löhdefink, M. Grillenberger, A. Dietz, A. Gröger, A. Hoffmann, T. Hubert

Published in: 2012 5th European DSP Education and Research Conference (EDERC)

13-14 September 2012 Amsterdam, Netherlands

DOI: 10.1109/EDERC.2012.6532266

Efficiency improvement of small hydroelectric power stations with a permanent-magnet synchronous generator

A. Dietz, A. Groeger, C. Klingler

Published in: 2011 1st International Electric Drives Production Conference

28-29 September 2011 Nuremberg, Germany

DOI: 10.1109/EDPC.2011.6085557

Electrostatic Precipitator Control Systems

N. Grass, A. Zintl, E. Hoffmann

Published in: IEEE Industry Applications Magazine (Volume: 16, Issue: 4, July-Aug. 2010)

2010 

DOI: 10.1109/MIAS.2010.936967

A New Mobile IGBT Inverter HV Test System for ESPs

N. Grass, M. Steingraeber, R. Metz

Published in: 2010 IEEE Industry Applications Society Annual Meeting

03-07 October 2010 Houston, TX, USA

DOI: 10.1109/IAS.2010.5615346

Energiesparpotentiale bei elektrischen Antrieben

A. Kremser

Published in: Mechatronik, Heft 03, 2009, 

2009

Web-Link: Ansehen

Enhanced Performance for Electrostatic Precipitators by Means of Conventional and Fuzzy Logic Control

N. Grass, A. Zintl, E. Hoffmann

Published in: 2008 IEEE Industry Applications Society Annual Meeting

05-09 October 2008 Edmonton, AB, Canada

DOI: 10.1109/08IAS.2008.100

150kV/ 300kW High Voltage Supply with IGBT Inverter for Large Industrial Electrostatic Precipitators

N. Grass

Published in: 2007 IEEE Industry Applications Annual Meeting

23-27 September 2007 New Orleans, LA, USA

DOI: 10.1109/07IAS.2007.127

Electrostatic precipitator diagnostics based on flashover characteristics

N. Grass

Published in: Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005

02-06 October 2005 Hong Kong, China

DOI: 10.1109/IAS.2005.1518822

Application of Different Types of High-Voltage Supplies on Industrial Electrostatic Precipitators

N. Grass, W. Hartmann, M. Klockner

Published in: IEEE Transactions on Industry Applications (Volume: 40, Issue: 6, Nov.-Dec. 2004)

2004

DOI: 10.1109/TIA.2004.836298

Fuzzy-logic-based power control system for multifield electrostatic precipitators

N. Grass

Published in: IEEE Transactions on Industry Applications (Volume: 38, Issue: 5, Sep/Oct 2002)

2002

DOI: 10.1109/TIA.2002.802998

Application of different types of high voltage supplies on industrial electrostatic precipitators

N. Grass, W. Hartmann, M. Klockner

Published in: Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344)

13-18 October 2002 Pittsburgh, PA, USA

DOI: 10.1109/IAS.2002.1044099

Lifetime considerations of high voltage semiconductor diodes for pulsed power applications

W. Hartmann, W. Haas, M. Romheld, N. Grass

Published in: Conference Record of the Twenty-Fifth International Power Modulator Symposium, 2002 and 2002 High-Voltage Workshop

30 June 2002 - 03 July 2002 Hollywood, CA, USA

DOI: 10.1109/MODSYM.2002.1189475

Microsecond pulsed power supply for electrostatic precipitators

N. Grass, W. Hartmann, M. Romheld

Published in: Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248)

30 September 2001 - 04 October 2001 Chicago, IL, USA

DOI: 10.1109/IAS.2001.955975

Fuzzy logic-optimising IGBT inverter for electrostatic precipitators

N. Grass

Published in: Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370)

03-07 October 1999 Phoenix, AZ, USA

DOI: 10.1109/IAS.1999.799185